Click For English  Click For German  Click For French
 
  Berlin Foundry and Machine Co.
Beveling Machine
 
 

Feature: Machine is used to cut 30 degree bevel on end of core to fit bevel type caps.

Power: Specify 230/460/575 volts/3 phase/60 hertz

Air Required: 80 P.S.I.

Core Beveling Machine
 
 
Bevelong Machine Motor: 3 HP. 1800 RPM, 182T Frame, TEFC

Capacity: 3/8in., 1/2in. and .660 wall cores.

Cutter: Replaceable Carbide Inserts
 
 
Method Of Operation: Select core to be beveled and place in trough and slide it forward until it comes up solid against the core stop. Immediately the electric eye will see the core in position and signal the clamp segment to clamp down on core. Dolly will then advance core to the beveling head where core will be beveled. Dolly will come in contact with "depth of cut" L.S. #2 retracting dolly, once dolly has retracted, L.S. #1 will open core clamp. Operator will then remove core from machine. Beveling
 
  BACK CopyRight TechPros 2013